Anchor Bolts, Dowels & Chemical Anchors Inspection & Test Plan – Editable Word Template

A professional, fully editable inspection and test plan for cast-in anchor bolts, dowels, post-installed mechanical anchors and bonded chemical anchors.

Designed for contractors, civil engineers, specialist installers and QA/QC teams to inspect, test and document anchoring works from design release through setting out, installation, testing and final turnover.

WHAT’S INCLUDED

• 29-page editable Microsoft Word document  
• Document reference: CV-LIB-ITP-CIV-042  
• Revision: Rev 0  
• 52 inspection and testing activities  
• Seven controlled inspection stages  
• Eight critical release gates  
• 10 editable appendices and inspection records  
• Hold, witness, review and surveillance points  
• Design, submittal and anchor-schedule verification  
• Approved-product and manufacturer-instruction checks  
• Installer, scanner and tester competence records  
• Anchor setting-out and location inspections  
• Datum, axis, level and orientation verification  
• Reinforcement, tendon and service scanning checks  
• Substrate type, condition and thickness verification  
• Anchor spacing and edge-distance measurements  
• Work-area, access and environmental checks  
• Drill equipment and bit-condition verification  
• Hole location, diameter, depth and alignment checks  
• Hole-cleaning sequence and equipment inspection  
• Dry, damp or water-filled hole verification  
• Cast-in anchor-bolt and dowel inspections  
• Mechanical-anchor installation checks  
• Chemical-anchor cartridge and batch traceability  
• Product expiry and storage-temperature checks  
• Threaded-rod and reinforcing-bar verification  
• Resin mixing and initial-discharge checks  
• Adhesive injection and hole-fill verification  
• Anchor insertion depth and alignment checks  
• Adhesive cure-time and temperature records  
• Protection against disturbance and premature loading  
• Torque-wrench calibration and tightening records  
• Installation-tolerance and as-built checks  
• Proof-load and pull-out test records  
• Test-equipment calibration and setup verification  
• Failed test, NCR and remedial-work controls  
• Repair, concession and retest records  
• Cast-in and mechanical-anchor release records  
• Post-installation inspection and remedial register  
• Hold-point and witness-point register  
• Anchor dossier and turnover-record index  
• Instant digital delivery  
• Five-download access limit  

IMPORTANT

This is a professional standard template, not a project-approved inspection and test plan. It must be reviewed, completed and adapted for the anchor design, substrate, anchor schedule, approved product system, installation procedure, inspection lots, tightening torque, proof-test frequency, test loads, acceptance criteria, witness requirements, applicable legislation, standards and client requirements before use.

The completed inspection and test plan must be reviewed and approved by appropriately competent and authorised engineering, specialist-installation and QA/QC personnel.

LICENCE

Licensed to the purchasing organisation for editing and use on its own projects. Resale, redistribution, sublicensing or sharing of the original template is prohibited.